data brief for further information contact your local stmicroelectronics sales office. october 2010 doc id 18104 rev 1 1/4 4 STR750-EVAL STR750-EVAL evaluation board features three 5 v power supply options: power jack, usb connection or daughter board real-time clock (rtc) audio play and record 3 rs232 connectors, one with hardware flow control usb 2.0 compliant with full speed (12 mb/s) data transmission can 2.0a/b connection inductor motor control connector with 6 pwm output and emergency stop debug and programming support via 20-pin jtag connector dot-matrix lcd module joystick with 4-direction control and selector extension connectors for daughter board or wrapping board description the str750 evaluation board (STR750-EVAL) is a complete development platform for stmicroelectronics? arm? core-based str75xf microcontrollers. based on a cost-effective, flexible and open design, it allows easy demonstration of str 75xf capabilities and enables rapid evaluation of the microcontroller?s peripherals and other features. it includes the high performance str750f microcontroller, which is based on the arm7tdmi-s core and includes usb 2.0 compliant port with full speed data transmission, can 2.0a/b compliant interface, 3 uart channels, internal flash and internal sram memory. the STR750-EVAL features a complete range of connectors and hardware features for developing applications based on str75xf peripherals including motor control, usb and rs232 connectors, microphone, speaker, joystick, and lcd display. the STR750-EVAL uses a jtag standard interface to connect to your host pc via any of a range of in-circuit emulators (ice) for arm core- based microcontrollers. www.st.com
ordering information STR750-EVAL 2/4 doc id 18104 rev 1 1 ordering information table 1. device summary order code reference STR750-EVAL STR750-EVAL evaluation board
STR750-EVAL revision history doc id 18104 rev 1 3/4 2 revision history table 2. document revision history date revision changes 25-oct-2010 1 initial release.
STR750-EVAL 4/4 doc id 18104 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
